Achieve operational efficiencies and cost reductions with building services automation solutions
Building services software helps construction engineers, HVAC professionals, contractors and building maintenance staff to achieve operational efficiency and cost reductions with centralized solutions that provide all the required functionalities for a particular building project.
Here, we will described some
of the highly useful building services software including automatic sprinkler systems, heatload calculation programs, and automaticfire sprinkler design software that can be used to overcome the challenges
of building services management, maintenance, and efficient project management.
Key
features of SPRINK2000 automatic fire sprinkler design software include:
The
piping system can have up to 10 input points that can be modelled as a fixed
pressure, a town mains water supply or a pump.
All
nodes that are not nominated as discharges or input points are automatically
assigned as reference nodes to save input effort.
When
pipe sizes are entered as nominal sizes, the program determines the actual I.D.
for the stored data for different pipe materials.
There
is a provision in the program for easily entering a gridded layout in the
program.
Graphical
display of the grid is provided where the user can display pipe numbers, node
numbers, lengths, and pipe diameters.
The
results of SPRINK2000 automatic sprinkler system include a summary of the flows
and pressure for all discharges and all input points.
CAMEL: The heat load
calculation software CAMEL calculates the design heating and cooling loads and
associate psychometrics for air conditioning plants in buildings. It models a
range of system types including constant volume heating and cooling, VAV with
and without reheat, evaporative coolers, and reverse cycle heat pumps.
Other important features of
CAMEL heat load calculation software include:
The
program caters to overhangs complete with drop panels and reveals both on both
windows and walls.
Drop
panels, light wells, balconies, and other shading schemes can be modelled by
the program.
Specific
monthly 3 pm design dry and wet bulb temperatures are available in the heat
load calculation program for over 600 locations in Australia and many other
offshore locations.
It
calculates psychometric analysis of each AHU with the coil performance
expressed as a bypass factor, leaving coil temperature bypass and dump back
systems.
Fresh
air quantities can be entered in the CAMEL heat load calculation program at
room or zone level as I/s/person with the plant fresh air quantity determined
using the Compartment Formula.
Wall
orientation can be at any direction and the entire building can be readily
rotated.
HYENA: The automatic fire
sprinkler design software can work on a wide range of units including Metric,
British and US.
It
operates under Windows and all input data is via a series of screens with
drop-down lists, selection lists, and selection lists.
Piping
material for a wide range of codes are catered into the program including
steel, iron, and copper to Australian and New Zealand standards.
Booster
pumps can be located anywhere in the network with backflow preventers and check
valves.
The
calculations by HYENA automatic fire sprinkler design software use a process of
matrix inversion to solve the differential equations for each loop in the
system.
Comments
Post a Comment